|
[root@home ~]# dmesg
Linux version 2.4.34.4 (root@deli) (gcc version 3.3.6) #1 Mon Mai 7 07:12:55 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000003000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
48MB LOWMEM available.
On node 0 totalpages: 12288
zone(0): 4096 pages.
zone(1): 8192 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 150.001 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 299.00 BogoMIPS
Memory: 46368k/49152k available (1088k kernel code, 2396k reserved, 448k data, 80k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After generic, caps: 000001bf 00000000 00000000 00000000
CPU: Common caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfda0c, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: 00:0a.0: class 605 doesn't match header type 02. Ignoring class.
PCI: 00:0a.1: class 605 doesn't match header type 02. Ignoring class.
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:01.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: IBM-DMCA-21440, ATA DISK drive
hdc: CD-ROM CDR_U112, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 2822400 sectors (1445 MB) w/96KiB Cache, CHS=700/64/63
hdc: attached ide-cdrom driver.
hdc: ATAPI 12X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k freed
Adding Swap: 124952k swap-space (priority -1)
arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al.
arcnet: COM20020 chipset support (by David Woodhouse et al.)
Real Time Clock Driver v1.10f
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe:
Intel i82365sl DF ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: none
host opts [1]: none
ISA irqs (scanned) = 3,4,7,9 polling interval = 1000 ms
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
pcnet_cs: this is an AX88190 card!
pcnet_cs: use axnet_cs instead.
pcnet_cs: unable to read hardware net address for io base 0x300
8139too Fast Ethernet driver 0.9.26
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/epic100.html
(unofficial 2.4.x kernel port, version 1.11+LK1.1.14, Aug 4, 2002)
lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
yellowfin.c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/yellowfin.html
(unofficial 2.4.x port, 1.05+LK1.1.5, May 10, 2001)
eth0: depca_probe() cannot find device at 0x0200.
3c503.c: Presently autoprobing (not recommended) for a single card.
3c503.c: No 3c503 card found (i/o = 0x0).
3c505.c: warning, using default DMA channel,
3c505.c: module autoprobe not recommended, give io=xx.
3c505.c: Failed to register card at 0x0.
3c507: register_netdev() returned non-zero.
3c515.c:v0.99t 17-Nov-2001 becker@scyld.com and others
0 3c515 cards found.
ac3200.c: No ac3200 card found (i/o = 0x0).
arlan: no devices found
at1700: register_netdev() returned non-zero.
8139too Fast Ethernet driver 0.9.26
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/epic100.html
(unofficial 2.4.x kernel port, version 1.11+LK1.1.14, Aug 4, 2002)
lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
yellowfin.c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/yellowfin.html
(unofficial 2.4.x port, 1.05+LK1.1.5, May 10, 2001)
eth0: depca_probe() cannot find device at 0x0200.
3c503.c: Presently autoprobing (not recommended) for a single card.
3c503.c: No 3c503 card found (i/o = 0x0).
3c505.c: warning, using default DMA channel,
3c505.c: module autoprobe not recommended, give io=xx.
3c505.c: Failed to register card at 0x0.
3c507: register_netdev() returned non-zero.
3c515.c:v0.99t 17-Nov-2001 becker@scyld.com and others
0 3c515 cards found.
ac3200.c: No ac3200 card found (i/o = 0x0).
arlan: no devices found
at1700: register_netdev() returned non-zero.
8139too Fast Ethernet driver 0.9.26
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/epic100.html
(unofficial 2.4.x kernel port, version 1.11+LK1.1.14, Aug 4, 2002)
lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
yellowfin.c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/yellowfin.html
(unofficial 2.4.x port, 1.05+LK1.1.5, May 10, 2001)
eth0: depca_probe() cannot find device at 0x0200.
3c503.c: Presently autoprobing (not recommended) for a single card.
3c503.c: No 3c503 card found (i/o = 0x0).
3c505.c: warning, using default DMA channel,
3c505.c: module autoprobe not recommended, give io=xx.
3c505.c: Failed to register card at 0x0.
3c507: register_netdev() returned non-zero.
3c515.c:v0.99t 17-Nov-2001 becker@scyld.com and others
0 3c515 cards found.
ac3200.c: No ac3200 card found (i/o = 0x0).
arlan: no devices found
at1700: register_netdev() returned non-zero.
8139too Fast Ethernet driver 0.9.26
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/epic100.html
(unofficial 2.4.x kernel port, version 1.11+LK1.1.14, Aug 4, 2002)
lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
yellowfin.c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/yellowfin.html
(unofficial 2.4.x port, 1.05+LK1.1.5, May 10, 2001)
eth0: depca_probe() cannot find device at 0x0200.
3c503.c: Presently autoprobing (not recommended) for a single card.
3c503.c: No 3c503 card found (i/o = 0x0).
3c505.c: warning, using default DMA channel,
3c505.c: module autoprobe not recommended, give io=xx.
3c505.c: Failed to register card at 0x0.
3c507: register_netdev() returned non-zero.
3c515.c:v0.99t 17-Nov-2001 becker@scyld.com and others
0 3c515 cards found.
ac3200.c: No ac3200 card found (i/o = 0x0).
arlan: no devices found
at1700: register_netdev() returned non-zero.
8139too Fast Ethernet driver 0.9.26
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/epic100.html
(unofficial 2.4.x kernel port, version 1.11+LK1.1.14, Aug 4, 2002)
lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
yellowfin.c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/yellowfin.html
(unofficial 2.4.x port, 1.05+LK1.1.5, May 10, 2001)
eth0: depca_probe() cannot find device at 0x0200.
3c503.c: Presently autoprobing (not recommended) for a single card.
3c503.c: No 3c503 card found (i/o = 0x0).
3c505.c: warning, using default DMA channel,
3c505.c: module autoprobe not recommended, give io=xx.
3c505.c: Failed to register card at 0x0.
3c507: register_netdev() returned non-zero.
3c515.c:v0.99t 17-Nov-2001 becker@scyld.com and others
0 3c515 cards found.
ac3200.c: No ac3200 card found (i/o = 0x0).
arlan: no devices found
at1700: register_netdev() returned non-zero.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
pegasus.c: v0.4.32 (2003/06/06):Pegasus/Pegasus II USB Ethernet driver
usb.c: registered new driver pegasus
|
